GPS Receivers
BT-338 Bluetooth
The
BT-338 contains a built-in SiRF Star III Low Power Chipset for high
sensitivity. It communicates with Host Platform (PDA, Laptop, and
etc.) via Bluetooth Serial Port Profile. It also contains a replaceable
battery with a large capacity (1700mAh), which enables the BT-338
to run up to 17 hours. A slide battery lid makes it easy for battery
removal. With the petite and sophisticated design, it would definitely
be your best choice!
Features
- SiRF Star III high performance and low power consumption chipset
- Communication with Host platform Via Bluetooth Serial Port Profile
- Built-in ceramic patch antenna
- Superior sensitivity for urban canyon and foliage environment
- 3 LED to show the rechargeable Li-ion battery
- Operation time:17 hours, in continuous mode
- Bluetooth operation range:10 Meter
- WAAS and ENGOS is supported.
The BT-338 GPS is constructed around the SiRFstar III GPS chipset.
This is the latest and most sensitive of the GPS chipsets designed
specifically for pulling in the weakest signals to provide the most
accurate position with the available data. As a result this is one
of the fastest starting and most accurate GPS receivers available.
Updates are available every 1 second, and are accurate down to 5
metres. This is one of the first of the new generation GPS chipsets
that has an all-in View high performance multifunctional 20 channels.
The output protocol is version 2.2 supporting the latest commands
such as GGA, GLL, VTG, RMC, GSA, GSV supporting most GPS or mapping
software that use NMEA.
All the GPS needs is a clear view of the sky to be able to calculate
your position and altitude accurately to within a few feet. With
older systems getting a position in cities and woodland was difficult.
With the latest single satellite positioning it provides more position
fixes in the narrow city streets or dense foliage environment.
|
Chipset
|
SiRF Star III
|
|
Frequency
|
L1, 1575.42 MHz
|
|
C/A code
|
1.023 MHz chip rate
|
|
Channels
|
20 channel all-in-view tracking
|
|
Antenna Type
|
Built-in Ceramic patch antenna
|
|
Position
|
10 meters, 2D RMS
|
|
Velocity
|
0.1 m/s
|
|
Time
|
1 us synchronized to GPS time
|
|
Default
|
WGS-84 Acquisition Time (Open sky, stationary)
|
|
Reacquisition
|
0.1 sec., average
|
|
Hot start
|
1 sec., average
|
|
Warm start
|
38 sec., average
|
|
Cold start
|
42 sec., average
|
|
Altitude
|
18,000 meters (60,000 feet) max.
|
|
Velocity
|
515 meters/second (1000 knots) max.
|
|
Acceleration
|
Less than 4g
|
|
Jerk
|
20 m/sec3
|
|
Voltage
|
Rechargeable and removable battery with 5V DC input charging
circuit
|
|
Operation Time
|
Default 17 hours after fully recharged, in continuous mode
Programmable >20 hours, in trickle power mode
|
|
Connection
|
Communication with host platform via Bluetooth Serial Port
Profile
|
|
Protocol messages
|
NMEA-0183 output protocol
|
|
Output format
|
GGA(1sec), GSA(5sec), GSV(5sec), RMC(1sec),VTG(1sec)
|
|
Operating temperature
|
-20 degrees to 60 degrees C
|
|
Humidity
|
5% to 95% Non-condensing
|
|
Dimension
|
72.5mm x 40.4mm x 23mm
|
|